Access Control
Restricting read and write access to topics and webs, by users and groups
Access Control allows you restrict access to single topics and entire webs, by individual user and by user Groups. Access control, combined with
UserAuthentication, lets you easily create and manage an extremely flexible, fine-grained privilege system.
An important consideration
Open, freeform editing is the essence of
WikiCulture - what makes Foswiki different and often more effective than other collaboration tools. For that reason, it is strongly recommended that the decision to restrict read or write access to a web or a topic is made with great care - the more restrictions, the less Wiki in the mix. Experience shows that
unrestricted write access works very well because:
- Peer influence is enough to ensure that only relevant content is posted.
- Peer editing - the ability for anyone to rearrange all content on a page - keeps topics focused.
- In Foswiki, content is transparently preserved under revision control:
- Edits can be undone by the administrator (per default a member of AdminGroup; see #ManagingGroups).
- Users are encouraged to edit and refactor (condense a long topic), since there's a safety net.
As a
collaboration guideline, create broad-based Groups (for more and varied input), and avoid creating view-only Users (if you can read it, you should be able to contribute to it).
Permissions settings of the webs on this Foswiki site
The topic
SitePermissions gives you an overview of the access control settings for all your webs.
Authentication vs. Access Control
Authentication: Identifies who a user is based on a login procedure. See
UserAuthentication.
Access control: Restrict access to content based on users and groups once a user is identified.
Users and groups
Access control is based on the familiar concept of users and groups. Users
are defined by their
WikiNames. They can then be organized in unlimited
combinations by inclusion in one or more user Groups. Groups can also be
included in other Groups.
Managing Users
In standard Foswiki a user can create an account in
UserRegistration. The following actions are performed:
- WikiName, encrypted password and email address are recorded using the password manager if authentication is enabled.
- A confirmation e-mail is sent to the user.
- A user home page with the WikiName of the user is created in the User web.
- The user is added to the WikiUsers topic.
- Optionally the user is added to one or more groups.
The default visitor name is
WikiGuest. This is the non-authenticated user. By default the non-authenticated user is not permitted to edit topics. If you require anonymous editing, see
UserAuthentication#IndividualScripts.
Your local Foswiki may have an alternate user mapping manager installed
which doesn't support user registration. Check with your Wiki administrator
if you are in doubt.
Managing Groups
The following describes the standard Foswiki support for groups. Your local Foswiki may have an alternate group mapping manager installed. Check with your Wiki administrator if you are in doubt.
Groups are defined by group topics located in the
User
web. To create a new group, visit
WikiGroups. You will find a "Create a new group" link at the top which reveals a form to create a new group. Enter the name of the new group ending in
Group
into the "Group Name" form field and the initial members in the "Members" field. This creates a new group topic.
By default any member of a group has access rights to both adding and removing users from the group through the nice user interface. If you need to limit this access further, change the ALLOWTOPICCHANGE setting through "More Topic Action" -> "Edit topic preference settings".
The
ALLOWTOPICCHANGE
setting defines who is allowed to change the group topic; it is a comma delimited list of users and groups. You typically want to restrict that to the members of the group itself, so it should contain the name of the topic. This prevents users not in the group from editing the topic to give themselves or others access. For example, for the KasabianGroup topic write:
-
Set ALLOWTOPICCHANGE = User.KasabianGroup
- Caution This is set in the "Topic Settings" and not inline in the topic text!
Foswiki has strict formatting rules. Make sure you have three spaces, an asterisk, and an extra space in front of any access control rule. See below for more information about ALLOWTOPICCHANGE.
Background: A group topic is an empty topic with 3 hidden preference settings.
- GROUP: Comma separated list of users and/or groups
- ALLOWTOPICCHANGE: Comma separated list of users and groups that are allowed to add and remove users from the group
- VIEW_TEMPLATE: Always set to the value
GroupView
. This alters the way the topic is presented to include a nice user interface for adding and removing users.
Foswiki 1.1 introduced the smart user interface for adding and removing members of a group. Group topics from prior versions of Foswiki will still work. These have the GROUP setting visible in the topic text itself and you edit it by editing the topic. Foswiki 1.1 WikiGroups will show these old group topics with an "Upgrade Group Topic button". The administrator can upgrade an old group topic to the nice new user interface with one easy click.
The Super Admin Group
A number of Foswiki functions (for example, renaming webs) are only available to administrators. Administrators are simply users who belong to the
SuperAdminGroup. This is a standard user group, the name of which is defined by {SuperAdminGroup} setting in
configure. The default name of this group is the
AdminGroup
. The system administrator may have chosen a different name for this group if your local Foswiki uses an alternate group mapping manager, but for simplicity we will use the default name AdminGroup in the rest of this topic.
You can create new administrators simply by adding them to the
AdminGroup topic. For example,
-
Set GROUP = User.ElizabethWindsor, User.TonyBlair
A member of the Super Admin Group has
unrestricted access throughout the wiki, so only trusted staff should be added to this group.
Restricting Access
Access to webs and topics is controlled by setting the values of certain
preferences. These names of these preferences have the general form:
permission context mode
Where
permission is ALLOW
or DENY
, _context is
TOPIC
,
WEB
, or
ROOT
, and
mode is
VIEW
,
CHANGE
, or
RENAME
. For example, the preference
ALLOWWEBCHANGE
lists who is allowed to change
topics in the current web.
- Restricting VIEW blocks viewing and searching of content. When you restric VIEW to a topic or web, this also restricts INCLUDE and Formatted SEARCH from showing the content of the topics.
- Restricting CHANGE blocks creating new topics, changing topics or attaching files.
- Restricting RENAME prevents renaming of topics within a web.
There is an important distinction between CHANGE access and RENAME access. A user can CHANGE a topic, but thanks to version control their changes cannot be lost (the history of the topic before the change is recorded). However if a topic or web is renamed, that history may be lost. Typically a site will only give RENAME access to administrators and content owners.
Note that ALLOWWEBxxx and DENYWEBxxx preferences can only be set in WebPreferences topics. You cannot define a site level access. Each web must be protected on their own. Subwebs inherit access settings from the parent web. See next section.
Note that ALLOWTOPICxxx and DENYTOPICxxx preferences apply only to the topic itself.
Be warned that some plugins may not respect access permissions.
FINALPREFERENCES affects access controls, allowing you to prevent changes to access control settings while still allowing edit access to topics.
Controlling access to a Web
You can define restrictions on who is allowed to view a Foswiki web. You can restrict access to certain webs to selected users and groups, by:
- authenticating all webs and restricting selected webs: Topic access in all webs is authenticated, and selected webs have restricted access.
- authenticating and restricting selected webs only: Provide unrestricted viewing access to open webs, with authentication and restriction only on selected webs.
- You can define these settings in the WebPreferences topic, preferable towards the end of the topic:
-
Set DENYWEBVIEW = < comma-delimited list of users and groups >
-
Set ALLOWWEBVIEW = < comma-delimited list of users and groups >
-
Set DENYWEBCHANGE = < comma-delimited list of users and groups >
-
Set ALLOWWEBCHANGE = < comma-delimited list of users and groups >
-
Set DENYWEBRENAME = < comma-delimited list of users and groups >
-
Set ALLOWWEBRENAME = < comma-delimited list of users and groups >
If your site allows sub-webs, then access to sub-webs is determined from the access controls of the parent web, plus the access controls in the sub-web. So, if the parent web has
ALLOWWEBVIEW
set, this will also apply to the subweb. Also note that you will need to ensure that the parent web's
FINALPREFERENCES
does not include the access control settings listed above. Otherwise you will not be able override the parent web's access control settings in sub-webs.
Creation and renaming of sub-webs is controlled by the WEBCHANGE setting on the parent web (or ROOTCHANGE for
root webs). Renaming is additionally restricted by the setting of WEBRENAME in the web itself.
Controlling access to a topic
- You can define these settings in any topic, preferable towards the end of the topic:
-
Set DENYTOPICVIEW = < comma-delimited list of users and groups >
-
Set ALLOWTOPICVIEW = < comma-delimited list of users and groups >
-
Set DENYTOPICCHANGE = < comma-delimited list of users and groups >
-
Set ALLOWTOPICCHANGE = < comma-delimited list of users and groups >
-
Set DENYTOPICRENAME = < comma-delimited list of users and groups >
-
Set ALLOWTOPICRENAME = < comma-delimited list of users and groups >
Caution! Settings are always taken from the latest (current) revision of a topic. If older revisions of a topic had more restrictive access controls, they will not be used when accessing the older revision.
Remember when opening up access to specific topics within a restricted web that other topics in the web - for example, the WebLeftBar - may also be accessed when viewing the topics. The message you get when you are denied access should tell you what topic you were not permitted to access.
Be careful with empty values for any of these.
-
Set ALLOWTOPICVIEW =
This means the same as not setting it at all. (This was documented wrong in versions 4.0.X, 4.1.0 and 4.1.1)
-
Set DENYTOPICVIEW =
This means do not deny anyone the right to view this topic. If DENYTOPICVIEW is set to an empty value anyone has access even if ALLOWTOPICVIEW or ALLOWWEBVIEW is defined. This allows you to have very restrictive default access rights to an entire web and still allow individual topics to have more open access.
The same rules apply to ALLOWTOPICCHANGE/DENYTOPICCHANGE and APPLYTOPICRENAME/DENYTOPICRENAME. Setting ALLOWTOPICCHANGE or ALLOWTOPICRENAME to en empty value means the same as not defining it. Setting DENYTOPICCHANGE or DENYTOPICRENAME to an empty value means that anyone can edit or rename the topic.
If the same setting is defined multiple times the last one overrides the previous. They are not OR'ed together.
Setting to an empty value has caused confusion and great debate and it has been decided that the empty setting syntax will be replaced by something which is easier to understand in a later version of Foswiki. A method to upgrade will be provided. Please read the release notes carefully when you upgrade.
See "How Foswiki evaluates ALLOW/DENY settings" below for more on how ALLOW and DENY interacts.
Controlling access to attachments
Attachments are referred to directly, and are not normally indirected via Foswiki scripts. This means that the above instructions for access control will
not apply to attachments. It is possible that someone may inadvertently publicise a URL that they expected to be access-controlled.
The easiest way to apply the same access control rules for attachments as apply to topics is to use the Apache
mod_rewrite
module, and configure your webserver to redirect accesses to attachments to the Foswiki
viewfile
script. For example,
ScriptAlias /foswiki/bin/ /filesystem/path/to/bin/
Alias /foswiki/pub/ /filesystem/path/to/pub/
RewriteEngine on
RewriteCond %{REQUEST_URI} !^/+foswiki/+pub/+System/+.+
RewriteRule ^/+foswiki/+pub/+([^/]+)((/+([^/]+))+)/+(.+) /foswiki/bin/viewfile/$1/$2?filename=$5 [L,PT]
That way all the controls that apply to the topic also apply to attachments to the topic. Other types of webserver have similar support.
Images embedded in topics will load much slower since each image will be delivered by the viewfile
script.
Controlling who can manage top-level webs
Top level webs are a special case, because they don't have a parent web with a
WebPreferences. So there has to be a special control just for the root level.
- You can define these settings in the SitePreferences topic, preferably towards the end of the topic:
-
Set DENYROOTCHANGE = < comma-delimited list of users and groups >
-
Set ALLOWROOTCHANGE = < comma-delimited list of users and groups >
Note that you do
not require
ROOTCHANGE
access to rename an existing top-level web. You just need
WEBCHANGE
in the web itself.
How Foswiki evaluates ALLOW/DENY settings
When deciding whether to grant access, Foswiki evaluates the following rules in order (read from the top of the list; if the logic arrives at
PERMITTED or
DENIED that applies immediately and no more rules are applied). You need to read the rules bearing in mind that VIEW, CHANGE and RENAME access may be granted/denied separately.
Settings are only read from the most current (latest) revision of a topic. Settings from older revisions are never used, even when viewing an older revision with the rdiff
script
- If the user is an administrator
- If DENYTOPIC is set to a list of wikinames
- people in the list will be DENIED.
- If DENYTOPIC is set to empty ( i.e. Set DENYTOPIC = )
- access is PERMITTED i.e no-one is denied access to this topic.
Attention: Use this with caution. This is deprecated and will likely change in the next release.
- If ALLOWTOPIC is set
- people in the list are PERMITTED
- everyone else is DENIED
- If DENYWEB is set to a list of wikinames
- people in the list are DENIED access
- If ALLOWWEB is set to a list of wikinames
- people in the list will be PERMITTED
- everyone else will be DENIED
- If you got this far, access is PERMITTED
Access control and INCLUDE
ALLOWTOPICVIEW and ALLOWTOPICCHANGE only applies to the topic in which the settings are defined. If a topic A includes another topic B, topic A does not inherit the access rights of the included topic B.
Examples: Topic A includes topic B
- If the included topic B has ALLOWTOPICCHANGE set to block editing for a user, it does not prevent editing the including topic A.
- If the included topic B has ALLOWTOPICVIEW set to block view for a user, the user can still view topic A but he cannot see the included topic B. He will see a message No permission to view B
Access control quick recipes
Obfuscating webs
Another way of hiding webs is by setting the
NOSEARCHALL
setting in
WebPreferences. It does the following:
- Prevents the
all webs
search option from accessing the web
- Hides the web from the %WEBLIST% macro.
* Set NOSEARCHALL = on
This setup can be useful to hide a new web until content its ready for deployment, or reduce clutter in the WebLeftBar and default search results when restricted access is not desired.
Setting NOSEARCHALL
to any value other than the empty string will hide a web. Setting NOSEARCHALL = off
will have the same effect as setting it to on
Obfuscating a web without setting view access control is very insecure, as anyone who knows the URL can access the web, and explicit searches naming that web will also work. For security purposes it is better to use the ALLOW or DENY VIEW settings in the WebPreferences topic. %SEARCH%
and %WEBLIST%
will not show any results for webs that the current user does not have permission to view.
Restrict Access to a whole Foswiki site
For a firewalled Foswiki, e.g. an intranet wiki or extranet wiki, you want to allow only invited people to access your Foswiki.
With this configuration, someone with access to the site needs to register new users. ResetPassword will also have to be done by administrators.
When using Apache Login
User authentication with ApacheLogin is enabled on your site. To reqire login for
all scripts:
- lock down access to the whole
bin
and pub
directories to all but valid users. In the Apache .htaccess
file or the appropriate .conf
file, replace the <FilesMatch "(attach|edit|...
section with this:
<FilesMatch ".*">
require valid-user
</FilesMatch>
If needed, you can further restrict access to selected webs with ALLOWWEBVIEW and other access control settings.
When using Template Login
User authentication with TemplateLogin is enabled on your site. To require login for
all scripts:
- Add all scripts in the
foswiki/bin
directory (except for login
, logon
and configure
) to the list of {AuthScripts}
in configure. For a default Foswiki installation:
{AuthScripts} = 'attach,compareauth,edit,manage,previewauth,rdiffauth,rename,rest,restauth,save,statistics,upload,viewauth,viewfileauth';
- Restricted (closed) site:
{AuthScripts} = 'attach,changes,compare,compareauth,edit,manage,oops,preview,previewauth,rdiff,rdiffauth,register,rename,resetpasswd,rest,restauth,save,search,statistics,upload,view,viewauth,viewfile,viewfileauth
If you install extensions that add scripts, you must also remember to add the new scripts to this list or the new scripts will not be protected.
Authenticate all webs and restrict selected webs
Use the following setup to authenticate users for topic viewing in all webs and to restrict access to selected webs. Requires
UserAuthentication to be enabled.
- The simple way is to add this to
WebPreferences
in all webs.
-
Set DENYWEBVIEW = WikiGuest
- Restrict view access to selected users and groups. Set one or both of these settings in its WebPreferences topic:
-
Set ALLOWWEBVIEW = < list of users and groups >
- Note:
DENYWEBVIEW
is evaluated before ALLOWWEBVIEW
. Access is denied if the authenticated person is in the DENYWEBVIEW
list, or not in the ALLOWWEBVIEW
list. Access is granted if DENYWEBVIEW
and ALLOWWEBVIEW
are not defined.
In rare cases it may be required to authenticate the view script. This can in some cases have a dramatic performance hit because the webserver must re-authenticate for every page view.
- Set
require valid-user
on your view
script in .htaccess or the appropriate Apache .conf file. This looks like: FilesMatch "(attach|edit|manage|rename|save|view|upload|mail|logon|.*auth).*"
(normally view
is not in that list).
Authenticate and restrict selected webs only
Use the following setup to provide unrestricted viewing access to open webs, with authentication only on selected webs. Requires
UserAuthentication to be enabled.
- Restrict view access to selected users and groups. Set one or both of these settings in its WebPreferences topic:
-
Set DENYWEBVIEW = < list of users and groups >
-
Set ALLOWWEBVIEW = < list of users and groups >
- Note:
DENYWEBVIEW
is evaluated before ALLOWWEBVIEW
. Access is denied if the authenticated person is in the DENYWEBVIEW
list, or not in the ALLOWWEBVIEW
list. Access is granted if DENYWEBVIEW
and ALLOWWEBVIEW
are not defined.
Show control settings
You can list the access controls affecting a topic using the
%SHOWPREFERENCE{}% macro in the topic, thus:
%SHOWPREFERENCE{"DENYWEBVIEW,ALLOWWEBVIEW,DENYWEBCHANGE,ALLOWWEBCHANGE,DENYWEBRENAME,ALLOWWEBRENAME"}%
For this topic, this displays:
- Set DENYWEBVIEW = ""
- DENYWEBVIEW was defined in User.SitePreferences
- Set ALLOWWEBVIEW = ""
- ALLOWWEBVIEW was defined in User.SitePreferences
- Set DENYWEBCHANGE = ""
- Set ALLOWWEBCHANGE = "%USERSWEB%.AdminGroup"
- ALLOWWEBCHANGE was defined in System.WebPreferences
- Set DENYWEBRENAME = "%MAINWEB%.WikiGuest"
- DENYWEBRENAME was defined in User.SitePreferences
- Set ALLOWWEBRENAME = "%USERSWEB%.AdminGroup"
- ALLOWWEBRENAME was defined in System.WebPreferences
Hide control settings
To hide access control settings from normal browser viewing, you can put them into the
topic preference settings by clicking the link
Edit topic preference settings
under
More topic actions
menu. Preferences set in this manner are not visible in the topic text, but take effect nevertheless. Access control settings added as topic preference settings are stored in the topic meta data and they override settings defined in the topic text.
Alternatively, place them in HTML comment markers, but this exposes the access setting during ordinary editing.
<!--
* Set DENYTOPICCHANGE = User.SomeGroup
-->
Related Topics: AdminDocumentationCategory,
UserAuthentication